CO2 vs Fiber Technology: Which one is right for you?

A careful and comprehensive analysis must examine not only the cutting equipment itself but also the impact the new machine will have on other existing fabrication processes.

Advancement of Fiber Laser Technology

Fiber laser cutting machine has been a standout amongst the most “problematic” innovations acquainted with the metalworking market for CO2 lasers were first presented for cutting in the 1980s. Fiber laser technology is considered a problematic and “progressive” change since it has affected the whole the norm in sheet metal creation. What’s more, the open doors are anything but difficult to figure it out.

Over a generally brief timeframe, we have seen exponential advances in Fiber laser technology utilized for flat sheet metal cutting. In only five years, Fiber lasers accomplished the 4kW cutting limit that took CO2 lasers roughly four times as long to reach.

Favorable circumstances of Fiber Laser Technology

The essential favorableconditions of fiber laser cutting machine level sheet metal with Fiber laser technology are gotten from its stable, Fiber-to-Fiber, a compact solid-state design configuration that is sans support and gives a lower cost of a taskthat can be accomplished with equivalent CO2 lasers. Fiber laser pillar qualities additionally accommodate considerably quicker cutting rates than CO2 as we will investigate underneath.

The engaged light emission a 2kW Fiber laser shows a 5X more prominent power thickness at the point of convergence when contrasted and a 4kW CO2 laser. It additionally has a 2.5X more prominent ingestion trademark because of the shorter wavelength of the Fiber laser.

The fiber laser cutting machine can cut copper, metal and aluminium are much preferable and all the more securely over CO2 because the bar is all,the more promptly ingested and not reflected. Fiber laser working expenses are regularly 50% of what a CO2 framework can offer because of the lower electrical utilization and high electrical effectiveness of Fiber Lasers.

There are numerous parts of working a CO2 laser that doesn’t exist with working a Fiber laser:

  • A high-power Fiber laser is fit for cutting up to 5 times quicker than a regular CO2 laser and uses a large portion of the working expenses.
  • Fiber lasers won’t bother with any warm-up time – ordinarily around 10 minutes for each start-up for a CO2 laser.
  • The Fiber laser has no pillar way support, for example, a mirror or focal point cleaning roars checks and bar arrangements. This can expend another 4 or 5 hours out of each week for a CO2 laser.
  • Fiber lasers have a completely fixed Fiber optic shaft way both at the power source and at the Fiber conveyance to the cutting head. The shaft isn’t subjected to pillar way defiles just like the case with CO2 lasers.
  • Fiber optic shaft always keep up reliable spouts bar focusing.

In the event that you are running numerous lasers, maybe you could consider supplanting two CO2 laser cutting machines with one fiber laser cutting machine? Check here.

Absolutely knowing and getting ready ahead of time that front-end office systems should stay aware of the profitability of the Fiber laser enables fabricators to modify their front-end procedures to keep the Fiber laser cutting, instead of sitting tight for occupations. For fabricators utilizing co2 laser cutter, cutting systems, making the move to Fiber technology speaks to a gigantic window of chance that can’t be neglected.…

CO2 vs Fiber Technology: Which one is right for you?

A careful and comprehensive analysis must examine not only the cutting equipment itself but also the impact the new machine will have on other existing fabrication processes.

Advancement of Fiber Laser Technology

Fiber laser cutting machine has been a standout amongst the most “problematic” innovations acquainted with the metalworking market for CO2 lasers were first presented for cutting in the 1980s. Fiber laser technology is considered a problematic and “progressive” change since it has affected the whole the norm in sheet metal creation. What’s more, the open doors are anything but difficult to figure it out.

Over a generally brief timeframe, we have seen exponential advances in Fiber laser technology utilized for flat sheet metal cutting. In only five years, Fiber lasers accomplished the 4kW cutting limit that took CO2 lasers roughly four times as long to reach.

Favorable circumstances of Fiber Laser Technology

The essential favorableconditions of fiber laser cutting machine level sheet metal with Fiber laser technology are gotten from its stable, Fiber-to-Fiber, a compact solid-state design configuration that is sans support and gives a lower cost of a taskthat can be accomplished with equivalent CO2 lasers. Fiber laser pillar qualities additionally accommodate considerably quicker cutting rates than CO2 as we will investigate underneath.

The engaged light emission a 2kW Fiber laser shows a 5X more prominent power thickness at the point of convergence when contrasted and a 4kW CO2 laser. It additionally has a 2.5X more prominent ingestion trademark because of the shorter wavelength of the Fiber laser.

The fiber laser cutting machine can cut copper, metal and aluminium are much preferable and all the more securely over CO2 because the bar is all,the more promptly ingested and not reflected. Fiber laser working expenses are regularly 50% of what a CO2 framework can offer because of the lower electrical utilization and high electrical effectiveness of Fiber Lasers.

There are numerous parts of working a CO2 laser that doesn’t exist with working a Fiber laser:

  • A high-power Fiber laser is fit for cutting up to 5 times quicker than a regular CO2 laser and uses a large portion of the working expenses.
  • Fiber lasers won’t bother with any warm-up time – ordinarily around 10 minutes for each start-up for a CO2 laser.
  • The Fiber laser has no pillar way support, for example, a mirror or focal point cleaning roars checks and bar arrangements. This can expend another 4 or 5 hours out of each week for a CO2 laser.
  • Fiber lasers have a completely fixed Fiber optic shaft way both at the power source and at the Fiber conveyance to the cutting head. The shaft isn’t subjected to pillar way defiles just like the case with CO2 lasers.
  • Fiber optic shaft always keep up reliable spouts bar focusing.

In the event that you are running numerous lasers, maybe you could consider supplanting two CO2 laser cutting machines with one fiber laser cutting machine?

Absolutely knowing and getting ready ahead of time that front-end office systems should stay aware of the profitability of the Fiber laser enables fabricators to modify their front-end procedures to keep the Fiber laser cutting, instead of sitting tight for occupations. For fabricators utilizing co2 laser cutter, cutting systems, making the move to Fiber technology speaks to a gigantic window of chance that can’t be neglected.…

DIFFERENT TYPES OF LASER CUTTING EQUIPMENT

Steps To Keep You Safe Whilst Using a Fiber Laser Cutting Machine

Buying a fiber laser cutting machine but not sure how you should go about using it? Don’t worry, there are thousands who want to set up a little business at home specializing in crafts but aren’t sure about using cutting machines. While these machines look very difficult and complex to work with, they can be in fact simple enough and really quite useful too. So, what steps should you consider taking in order to keep you safe?

Learn How to Use the Machine

To be honest, a lot of people don’t truly understand how a laser cutter machine works and end up getting seriously hurt. The trouble is most people don’t think about learning how these machines work as they think they are pretty straightforward. They can be simple enough to use but only when you fully know how they work. Once you get some education about proper usage of the machines, they can actually be really quite simple to work alongside with. There has never been a better and more important factor to ensure there is proper education. If you want to use the cutting machines safely you need to know how to use the machine first.

Always Work In a Room with Plenty of Ventilation

Debris and fumes can be emanated when the machine is in use and that can often be a little overpowering. Debris shouldn’t be too much of a problem if you are wearing safety clothing and eye protection but the fumes can be another matter. It is very much important to take the time to ensure you are working in a room that has plenty of ventilation. If you are working within an enclosed space, you should try to keep as much air in so that you aren’t overpowered by the fumes. If there is no ventilation you should work in smaller sessions, for instance, no more than three minutes before taking a break. This helps to ensure you are safe whilst using the fiber laser cutting machine. It will be very much worth the extra precautions.

Take It Slow!

Trying to rush through what you need to do is the best way to get hurt. You can easily lose focus over what you’re doing and end up injuring yourself badly – which isn’t what you want. Instead, you should look at taking your laser cutting slowly. You will find you can use the laser cutter machine a lot more successfully and effectively when you go slowly. Rushing through the task at hand could cause you to be messy and cause a few injuries to yourself; instead, go slower and you will find things much easier and tidier!

Stay Safe

It’s very easy to say a laser cutting machine is simple to use but unless you fully know what you’re doing, you might run into a heap of trouble. Far too many people take for granted how dangerous a machine can be in the hands of someone who don’t know what they are doing. It’s important to educate yourself on such matters to ensure you stay safe at all times. What is more, you need to have a good working environment and to take things a little slowly too so that nothing goes wrong. A fiber laser cutting machine can be a great tool for anyone today.…

Everything You Need to Know About Laser Engraving and Cutting Wood

 

INTRODUCTION

CO2 optical laser engraving/cutting systems work with a spread of materials acrylic, textiles, natural stone, etc. Wood, however, is perhaps one the foremost widespread engraving mediums within the business nowadays. From customized gifts to engraving an organization brand or logo on a product, there area unit such a big amount of belongings you will do with an optical device.  You can check out this laser cutter video of Boss Laser LS series as an example.  Most laser cutting companies will offer videos so you can see the machine processing material without having to visit the place of business.

Wood Type

Before you even activate your optical device, take into account the sort of wood you’ll be engraving. Greenhouse emission optical device systems will engrave on nearly any sort of wood. A number of a lot of common woods embrace maple, cherry, birch ply, alder, bamboo, and walnut. All of those varieties engrave otherwise and can lead to totally different appearance – maple and cherry give a pleasant distinction once optical device incised, whereas walnut is extremely dark. Bamboo could be a highly regarded wood for engraving, however, as a result of the grain pattern may end up in Associate in Nursing inconsistent distinction.

The wood you decide on principally depends on the item being incised. As an example, Associate in Nursing oak barrel goes to engrave otherwise than a bamboo chopping board.Figure 1. An optical device cut map of Golden, Colo. Source: Epilog LaserFigure one. An optical device cut map of Golden, Colo. Source: Epilog optical device thanks to its skillfulness and sturdiness, wood is Associate in Nursing exceptionally widespread engraving substrate.

Customization

Customizing image frames with names, phrases or dates; making inlays for cupboards and plaques; personalising cutting boards, jewellery boxes, and humidors – the applications area unit apparently endless. Since Epilog optical device systems each engrave and cut, you’ll conjointly tackle prototyping jobs or custom cutting comes like this laser-cut map. Personalised presents area unit one among the most important applications for optical device engraving wood (among different mediums). You’ll optical device engrave skate decks, phone cases, musical instruments, and plenty of different wood things. Optical device customisation will increase theperceived price and is extremely abundant in high demand. Lasers conjointly permit operators to simply complete their creations by quickly engraving a brand in an not easily seen spot on a present.

Epilog

Epilog shares many samples of laser-cut wood comes on their website, like a wood veneer inlay box for example. There’s a long winded tutorial for laser-engraving a bamboo chopping board there. These creations represent a number of the foremost widespread uses for optical device engraving with wood. Users will transfer the styles of those comes directly from Epilog’s web site, wherever bit-by-bit directions lead users through the complete tutorial.

Epilog’s optical device systems are not so simple to use. By following the steps, you’ll be on your way with some struggle to successfully engraving wood projects. Produce your graphic in any Windows-based graphics style software package. The foremost widespread within the business is CorelDRAW. However, nearly any vector-based software package can do.Send the planning to print within the optical device. Ensure that your print settings match the fabric you’re mistreatment.Load the fabric that you simply area unit engraving into the optical device machine and send the task to the optical device.Watch your creation print right before your eyes!

CONCLUSION

Laser engraving with wood is each remarkably simple and spectacular. Keeping these easy steps in mind, you’ll be on your thanks to manufacturing your own distinctive laser-engraved wood creation!…

ALL ABOUT THE LASER CUTTING MACHINE

Laser Cutting Machines – Today’s Latest Technology

Lately, a hobby laser was just an idea, a concept that very few were alert to or considered. However, today, that has sorely evolved, and nowadays there are hundreds of thousands using laser lowering technology. Laser cutter machine is, in reality,handy for a variety of reasons plus they could help any business during the manufacturing process. They are valued tools, and they will become highly popular too.

What Can Laser Cutting Machines Be UsedFor?

Chopping materials such as metals, wood and the smooth fabric have become far simpler, and it is all down to a laser cutter machine. You would not think these tools would assist in almost any slicing task. Nonetheless,they do and are so greatly needed. However, it is not just big businesses and manufacturers who are using such tools, home-based businesses and build enthusiast are also using them. They are nifty little features though, and they can handle anything that is thrown at home.

Using a Laser Cutter in Manufacturing

Manufacturing is a numerousfield, and it is quite extraordinary, but there are a great number of challenges to come with this too. After you manufacture, you are chopping tons of materials so when you are doing, some particles and particles get left out. However, these exact things make a difference the chop of the material, especially if a saw edge is used. Metal blades are great however they can proceed through a lot in a concisetime which can lead to dullness in the blade. This will cause the knife to cut not as efficiently as before, and that can cost a business thousands of dollars, potentially hundreds of thousands. However, a laser slicing machine can avoid these problems and may offer clean slashes.

A Modern Solution for Modern Businesses

Using laser cutter machine can be great, but as time change, there is a need to change with it. You cannot just adhere to the old-fashioned tools whenever your competitors are employing the latest leading edge technology because they could out-strip your company. If this happens, you probably could lose out in custom, and that means less money. You do not know where you will finish up and that is the reason it is becoming extremely essential to change with contemporary times. Using a laser cutter can be a great idea, and it’s not too difficult to make use of either. That is a straightforward tool, and it easily makes cutting materials.  Its always wise to perform a background check on the company you buy a laser cutter from.  You can find reviews of Boss Laser cutters here.  You can alternatively find recent feedback from other third party review site of Bosslaser here as well.

Designing Complex Shapes

When you are building something special and it’sreally oddly designed or designed, then that will present a whole lot of challenges. Lowering the materials is rough at the best of that time period, but since you’re building a unique part, it’s far tougher. This may mean you have more work on the hands or the project doesn’t get off the ground. That is a waste products but with a laser slicing machine you can ensure the materials are slice nevertheless, you like and want them to be. This is simple to do as a result of lasers and their capacity to minimize fast and specific.

Step intoLatest Technology

Change is a horrid thing and in all honesty there aren’t many who enjoy it. You never know very well what is going to come from change and it’s really a terrifying thing. However, laser cutter machine aren’t so daunting and they can help you save so much time, money and even energy too! Utilizing a laser cutter can be a great idea and it’s really one to understanding!…

Uses for Laser Cutting

When it comes to laser cutting, it’s hard work, but ultimately rewarding. It allows you to create some truly incredible things that otherwise would either not be feasible or would be much, much more difficult. So much so as to be a waste of time, perhaps. Therefore, it’s a good thing we have the tech to make such jobs possible, or at least more so. While there are plenty of ways to utilize this tech, it’s safe to say that most of it belongs to the corporate sector. However, there are a number of ways you can use this tech to your advantage in your personal life. Here are some suggestions on how to get a little extra value of your laser cutter today.

First and foremost, laser cutting, like most tools, really, has artistic potential. Basically, it’s like a high tech pair of scissors, and while you might think you could just use scissors instead, you’re missing out the most important details available. First of all, let’s not forget that laser cutting is incredibly precise. This alone makes this tool a good one for all projects that require cutting, both private and public. Both amateur and professional. However, the main draw of laser cutting is that it can cut through just about anything, which gives you an enhanced ability to work with metal or stone. Therefore, you could create some pretty gnarly sculptures using this tech. This brings me to my next point.

Laser cutting presents you with a unique opportunity to create and give gifts to friends and family. Who doesn’t like a hand made gift, first of all? Well, I suppose the more miserly and materialistic among probably don’t care for them, but I digress. However, most of us appreciate the efforts that go into this kind of gift, and it imbues the gift with sentimental value much deeper than any monetary value. So, consider taking this route next Christmas, for example, to really make a lasting impression. Or, you could research your family tree with Ancestry.com and create mind blowing and unique metal sculptures to give as gifts to family you didn’t even know you had.

There’s a ton of potential, perhaps unlimited potential, in laser cutting tech. There are many things you couldn’t do, or couldn’t do easily, without it, so it’s truly a blessing. Just remember that tools don’t just belong to the pros. Otherwise, we wouldn’t have art.…

How to Startup A Home Laser Engraver Business without A High Investment?

If you’re an entrepreneur at heart and a self proclaimed DIY’er you’ve no doubt heard about a desktop or hobby laser engraver.  Prices compared to CNC machines are very attractive.  Laser engraving affords you the ability to create a unique business at home. Engraving jewelry, guns, metals, signs, tumblers Yeti cups and other such items can be fun, exciting and lucrative!

You do have a wide variety of laserable materials and customers to sell to and it’s a great business adventure to say the least. However, what if you don’t have a lot of start up capital, can you still start a business? Of course you can, but there’s a few things you can consider…

You Must Decide Whether to Rent or Purchase A CO2 Laser Engraver

The very first thing you need in order to start your home based business is the necessary equipment. One very crucial piece is the laser engraver but you have a few options here. You can choose to buy the engraver outright or rent it. These machines can in fact be pretty costly to buy outright so it might be wise to rent for a little while (you can find rentals in maker spaces) until the business is established and making money. If you feel buying now is the better choice that is your decision; choose wisely and think about the long and short-term of the business.

“Purchasing the best co2 laser engraver for a start up comes down to not just getting the best price, but the best overall, long-term value.  You want a laser that will grow with you without costing a lot to upgrade (i.e. the laser tube or work area) later on.”

Also, you must think about your finances.  Purchasing a the best co2 laser engraver when starting up comes down to not just the best price, but the best overall, long-term value.  You want a laser that will grow with you without costing a lot to upgrade the laser tube or work area.  One laser company that comes to my mind is: https://www.bosslaser.com.  If you do a review you’ll find they offer good prices for start up companies, schools, and hobbyists with financing or leasing options.

Dedicate a Room within the Home to the Business

Your business may be starting at home but that doesn’t mean to say you can’t still be professional! It would be more than wise to look into dedicating one or two areas within the home to the business. If the laser engraver is in the study or a spare room then make that one room entirely for the business. This will make things far easier to find and you can easily complete orders in a more effective manner too. Having remnants of the business scattered throughout the home isn’t well organized and it could seriously hamper the business. Poor organization isn’t very professional. Check here !

Market Effectively

It doesn’t matter if you have a lot of money to invest into the business at this initial stage or otherwise, you must still market and do so in a proper manner. Marketing can come in a variety of forms, word of mouth for instance, but there are numerous free online options to explore. For instance, you can write articles about the services you have and the laser engraving business in general, linking them back to you. Also, a website might be useful which again doesn’t require a lot of investment. Flyers, newsletters (both on and offline) can be useful and there are also social media and social networking sites to use to your advantage. The CO2 laser engraver is a great machine but that alone won’t make the business. You need to ensure the marketing is done effectively also.

Have Phone Line and Email Account Exclusively For the Business

While you might think having a laser engraver would be enough, more has to be done for this business. You need to look into how potential customers will contact you; this usually means via telephone or email. It can be a bad idea to have a home phone number as the business phone number also. The reason why is simply because another member of the family can answer the phone and make a mistake in taking an order or answering a question – it could cost your business. That is why it’s a good idea to have a dedicated phone line, this can be a cell phone number but it can keep your social life away from the business side of things. It’s also wise to do the same with your email; have a new email setup for the business too.

Creating a Business from Home Is Rewarding

Running your own business does have its rewards and if you want to create a new stream of income, this is it. However laser engraving can be fantastic and you can choose from a variety of materials to work with too. You will love it truly. When you have a reliable CO2 laser engraver and have marketed, you’re good to go.…