Steps To Keep You Safe Whilst Using a Fiber Laser Cutting Machine

Buying a fiber laser cutting machine but not sure how you should go about using it? Don’t worry, there are thousands who want to set up a little business at home specializing in crafts but aren’t sure about using cutting machines. While these machines look very difficult and complex to work with, they can be in fact simple enough and really quite useful too. So, what steps should you consider taking in order to keep you safe?

Learn How to Use the Machine

To be honest, a lot of people don’t truly understand how a laser cutter machine works and end up getting seriously hurt. The trouble is most people don’t think about learning how these machines work as they think they are pretty straightforward. They can be simple enough to use but only when you fully know how they work. Once you get some education about proper usage of the machines, they can actually be really quite simple to work alongside with. There has never been a better and more important factor to ensure there is proper education. If you want to use the cutting machines safely you need to know how to use the machine first.

Always Work In a Room with Plenty of Ventilation

Debris and fumes can be emanated when the machine is in use and that can often be a little overpowering. Debris shouldn’t be too much of a problem if you are wearing safety clothing and eye protection but the fumes can be another matter. It is very much important to take the time to ensure you are working in a room that has plenty of ventilation. If you are working within an enclosed space, you should try to keep as much air in so that you aren’t overpowered by the fumes. If there is no ventilation you should work in smaller sessions, for instance, no more than three minutes before taking a break. This helps to ensure you are safe whilst using the fiber laser cutting machine. It will be very much worth the extra precautions.

Take It Slow!

Trying to rush through what you need to do is the best way to get hurt. You can easily lose focus over what you’re doing and end up injuring yourself badly – which isn’t what you want. Instead, you should look at taking your laser cutting slowly. You will find you can use the laser cutter machine a lot more successfully and effectively when you go slowly. Rushing through the task at hand could cause you to be messy and cause a few injuries to yourself; instead, go slower and you will find things much easier and tidier!

Stay Safe

It’s very easy to say a laser cutting machine is simple to use but unless you fully know what you’re doing, you might run into a heap of trouble. Far too many people take for granted how dangerous a machine can be in the hands of someone who don’t know what they are doing. It’s important to educate yourself on such matters to ensure you stay safe at all times. What is more, you need to have a good working environment and to take things a little slowly too so that nothing goes wrong. A fiber laser cutting machine can be a great tool for anyone today.…

Everything You Need to Know About Laser Engraving and Cutting Wood



CO2 optical laser engraving/cutting systems work with a spread of materials acrylic, textiles, natural stone, etc. Wood, however, is perhaps one the foremost widespread engraving mediums within the business nowadays. From customized gifts to engraving an organization brand or logo on a product, there area unit such a big amount of belongings you will do with an optical device.  You can check out this laser cutter video of Boss Laser LS series as an example.  Most laser cutting companies will offer videos so you can see the machine processing material without having to visit the place of business.

Wood Type

Before you even activate your optical device, take into account the sort of wood you’ll be engraving. Greenhouse emission optical device systems will engrave on nearly any sort of wood. A number of a lot of common woods embrace maple, cherry, birch ply, alder, bamboo, and walnut. All of those varieties engrave otherwise and can lead to totally different appearance – maple and cherry give a pleasant distinction once optical device incised, whereas walnut is extremely dark. Bamboo could be a highly regarded wood for engraving, however, as a result of the grain pattern may end up in Associate in Nursing inconsistent distinction.

The wood you decide on principally depends on the item being incised. As an example, Associate in Nursing oak barrel goes to engrave otherwise than a bamboo chopping board.Figure 1. An optical device cut map of Golden, Colo. Source: Epilog LaserFigure one. An optical device cut map of Golden, Colo. Source: Epilog optical device thanks to its skillfulness and sturdiness, wood is Associate in Nursing exceptionally widespread engraving substrate.


Customizing image frames with names, phrases or dates; making inlays for cupboards and plaques; personalising cutting boards, jewellery boxes, and humidors – the applications area unit apparently endless. Since Epilog optical device systems each engrave and cut, you’ll conjointly tackle prototyping jobs or custom cutting comes like this laser-cut map. Personalised presents area unit one among the most important applications for optical device engraving wood (among different mediums). You’ll optical device engrave skate decks, phone cases, musical instruments, and plenty of different wood things. Optical device customisation will increase theperceived price and is extremely abundant in high demand. Lasers conjointly permit operators to simply complete their creations by quickly engraving a brand in an not easily seen spot on a present.


Epilog shares many samples of laser-cut wood comes on their website, like a wood veneer inlay box for example. There’s a long winded tutorial for laser-engraving a bamboo chopping board there. These creations represent a number of the foremost widespread uses for optical device engraving with wood. Users will transfer the styles of those comes directly from Epilog’s web site, wherever bit-by-bit directions lead users through the complete tutorial.

Epilog’s optical device systems are not so simple to use. By following the steps, you’ll be on your way with some struggle to successfully engraving wood projects. Produce your graphic in any Windows-based graphics style software package. The foremost widespread within the business is CorelDRAW. However, nearly any vector-based software package can do.Send the planning to print within the optical device. Ensure that your print settings match the fabric you’re mistreatment.Load the fabric that you simply area unit engraving into the optical device machine and send the task to the optical device.Watch your creation print right before your eyes!


Laser engraving with wood is each remarkably simple and spectacular. Keeping these easy steps in mind, you’ll be on your thanks to manufacturing your own distinctive laser-engraved wood creation!…

Uses for Laser Cutting

When it comes to laser cutting, it’s hard work, but ultimately rewarding. It allows you to create some truly incredible things that otherwise would either not be feasible or would be much, much more difficult. So much so as to be a waste of time, perhaps. Therefore, it’s a good thing we have the tech to make such jobs possible, or at least more so. While there are plenty of ways to utilize this tech, it’s safe to say that most of it belongs to the corporate sector. However, there are a number of ways you can use this tech to your advantage in your personal life. Here are some suggestions on how to get a little extra value of your laser cutter today.

First and foremost, laser cutting, like most tools, really, has artistic potential. Basically, it’s like a high tech pair of scissors, and while you might think you could just use scissors instead, you’re missing out the most important details available. First of all, let’s not forget that laser cutting is incredibly precise. This alone makes this tool a good one for all projects that require cutting, both private and public. Both amateur and professional. However, the main draw of laser cutting is that it can cut through just about anything, which gives you an enhanced ability to work with metal or stone. Therefore, you could create some pretty gnarly sculptures using this tech. This brings me to my next point.

Laser cutting presents you with a unique opportunity to create and give gifts to friends and family. Who doesn’t like a hand made gift, first of all? Well, I suppose the more miserly and materialistic among probably don’t care for them, but I digress. However, most of us appreciate the efforts that go into this kind of gift, and it imbues the gift with sentimental value much deeper than any monetary value. So, consider taking this route next Christmas, for example, to really make a lasting impression. Or, you could research your family tree with Ancestry.com and create mind blowing and unique metal sculptures to give as gifts to family you didn’t even know you had.

There’s a ton of potential, perhaps unlimited potential, in laser cutting tech. There are many things you couldn’t do, or couldn’t do easily, without it, so it’s truly a blessing. Just remember that tools don’t just belong to the pros. Otherwise, we wouldn’t have art.…

How to Startup A Home Laser Engraver Business without A High Investment?

If you’re an entrepreneur at heart and a self proclaimed DIY’er you’ve no doubt heard about a desktop or hobby laser engraver.  Prices compared to CNC machines are very attractive.  Laser engraving affords you the ability to create a unique business at home. Engraving jewelry, guns, metals, signs, tumblers Yeti cups and other such items can be fun, exciting and lucrative!

You do have a wide variety of laserable materials and customers to sell to and it’s a great business adventure to say the least. However, what if you don’t have a lot of start up capital, can you still start a business? Of course you can, but there’s a few things you can consider…

You Must Decide Whether to Rent or Purchase A CO2 Laser Engraver

The very first thing you need in order to start your home based business is the necessary equipment. One very crucial piece is the laser engraver but you have a few options here. You can choose to buy the engraver outright or rent it. These machines can in fact be pretty costly to buy outright so it might be wise to rent for a little while (you can find rentals in maker spaces) until the business is established and making money. If you feel buying now is the better choice that is your decision; choose wisely and think about the long and short-term of the business.

“Purchasing the best co2 laser engraver for a start up comes down to not just getting the best price, but the best overall, long-term value.  You want a laser that will grow with you without costing a lot to upgrade (i.e. the laser tube or work area) later on.”

Also, you must think about your finances.  Purchasing a the best co2 laser engraver when starting up comes down to not just the best price, but the best overall, long-term value.  You want a laser that will grow with you without costing a lot to upgrade the laser tube or work area.  One laser company that comes to my mind is: https://www.bosslaser.com.  If you do a review you’ll find they offer good prices for start up companies, schools, and hobbyists with financing or leasing options.

Dedicate a Room within the Home to the Business

Your business may be starting at home but that doesn’t mean to say you can’t still be professional! It would be more than wise to look into dedicating one or two areas within the home to the business. If the laser engraver is in the study or a spare room then make that one room entirely for the business. This will make things far easier to find and you can easily complete orders in a more effective manner too. Having remnants of the business scattered throughout the home isn’t well organized and it could seriously hamper the business. Poor organization isn’t very professional. Check here !

Market Effectively

It doesn’t matter if you have a lot of money to invest into the business at this initial stage or otherwise, you must still market and do so in a proper manner. Marketing can come in a variety of forms, word of mouth for instance, but there are numerous free online options to explore. For instance, you can write articles about the services you have and the laser engraving business in general, linking them back to you. Also, a website might be useful which again doesn’t require a lot of investment. Flyers, newsletters (both on and offline) can be useful and there are also social media and social networking sites to use to your advantage. The CO2 laser engraver is a great machine but that alone won’t make the business. You need to ensure the marketing is done effectively also.

Have Phone Line and Email Account Exclusively For the Business

While you might think having a laser engraver would be enough, more has to be done for this business. You need to look into how potential customers will contact you; this usually means via telephone or email. It can be a bad idea to have a home phone number as the business phone number also. The reason why is simply because another member of the family can answer the phone and make a mistake in taking an order or answering a question – it could cost your business. That is why it’s a good idea to have a dedicated phone line, this can be a cell phone number but it can keep your social life away from the business side of things. It’s also wise to do the same with your email; have a new email setup for the business too.

Creating a Business from Home Is Rewarding

Running your own business does have its rewards and if you want to create a new stream of income, this is it. However laser engraving can be fantastic and you can choose from a variety of materials to work with too. You will love it truly. When you have a reliable CO2 laser engraver and have marketed, you’re good to go.…



Using laser equipment nowadays makes practically any job of cutting and engraving easy to do and fast to finish. Doing that just makes you or your boss more profit.  Rest assured that using laser equipment is safe to use (although buying a chinese Laser direct from China can be very hazardous), because it is fully enclosed in order to prevent any accidents.  Laser cutting has been around for many years to design and create signage and similar products. Now, professionals and sign makers have been found a new and varied use for laser cutting edge technology in order to provide more improved products and services to their clientele.  Laser cutting has evolved to become a cutting-edge technology that is a level above the rest rather than the mechanical cutting. Laser cutting is usually use for metals just like the carbon steel, stainless steel, aluminum and copper alloys. Laser cutting was being used to direct the output of a high-power laser, by computer, and the materials that have been cut leaving an edge with a good quality. click here for more details.

Laser equipment is commonly used in the metal fabrication industry in order to increase the cutting speed and cutting capacity, and also reduce production costs, the production will also increase and the demand of their clients will also increase because of the improve of cutting quality. The primary advantages of the laser equipment are the cutting quality, cutting speed, economy, and precision. Laser cutting edge technology includes easier work holding and reduces the contamination of the output of your work piece. You have high quality results of the product because of high accuracy of your job since the laser beam does not wear during the process. When you are using a traditional cutting machine, some materials are difficult or impossible to cut – that is why laser cutting-edge technology is the best way to use for some materials that are difficult or impossible to cut. for more information , click on : http://satprnews.com/2016/12/07/laser-welding-equipment-market-volume-analysis-segments-value-share-and-key-trends-2015-2025/


Mechanical cutting-edge technology will give a rougher edge finish to the cut surface, which is not the same with the laser cutting. The laser equipment leaves a polished and good result in terms of the finished edge, and you won’t need to do any additional finishing. You will have less risks doing your job when you are using laser equipment in cutting edge technology. It will be a great experience to your job to have unrivaled equipment that will help you a lot, especially jobs that delegate and need accuracy in order to have a good output.

Having a good quality product will and always has attracted customers or clients.  As they look for a metal industry that will provide them clean and accurate machined parts a quality laser will help any business. . Most of the industry prefer cutting edge technology with laser equipment. You can create your designs without limit to cutting or engraving.  You use  computer aided design progams with touch screen pc’s.  This enables operators the ability to plot out the design you want.  It’s also necessary for prototyping and large part runs.  In this case lasers will process all rather quickly due to the machines high feed rate and speed.  I realize most laser machinery is expensive.  If you’re wanting to buy a lower priced machine be sure to check out hobby lasers if you’re wanting something more affordable.…



There are different types of laser cutting equipment, and it is useful for every person having problems cutting and engraving, and it has some common types of laser cutting equipment, and the laser machines that are already offered in the market mostly change by the use of laser source, because it is fast and easy to use. The common types of laser cutting equipment are CO2 lasers, fiber lasers, and the Nd: YAG, Nd: YVO. Each type of laser cutting equipment has its own advantages and disadvantages. The CO2 laser is created on a carbon dioxide gas mixture, which is stirred electrically, and their usually used or fitted for working on non-metallic materials and on most plastics. And also the CO2 lasers have a quietly a high efficiency and feature a precise good beam quality, that is why CO2 lasers is mostly used laser types. click here for related information.

The other common type of laser cutting equipment is fiber lasers. It is commonly used for metal marking by way of strengthening, for high-contrast plastic markings, and metal engraving. Fiber laser technology is one of the solid state laser group, there no need for maintenance and feature a long service life of at least 25,000 laser hours. The fiber lasers will generate a laser beam by means of the so-called seed laser and amplify it, particularly in designing a glass fiber, and it will supply with energy. A crystal laser is also one of the common types of laser cutting equipment, and it is also one of the solid state lasers. Most of the lasers today for marking applications are pumped by diodes. Crystal lasers have the same wavelength just like the fiber lasers and it is also fitted to use for marking metals and plastics. for more information, visit : https://www.wired.com/2013/11/printed-liquid-crystal-lasers/


The laser cutting equipment is different from the traditional mechanical cutters. The lasers don’t have to make physical contact with the metals, and also it will minimize the chances of the material to be contaminated, there’s no need to wear on the equipment. The lasers cutting machine can cut metal with higher accuracy that the traditional mechanical cutter will not. The mechanical cutters are usually a wide heat affected zone that will cause material warping from time to time, while the laser cutting machines will minimize the chance that the materials get warped. One of the things you need to consider is your safety in using the laser cutting machines and the mechanical cutting machines, most of the lasers cutting machine are fully enclose to prevent accidents or to avoid mass destruction! Laser cutting machines are equipped with computer touch screens, so they are fast and efficient. The workers will only plot out the design alternations for prototypes and large part job runs. Most of the laser cutter machines progress quickly because of the high feed rates and laser head speed. Your workers can do multiple jobs, because they are only monitoring the process. Laser cutting machines can help you a lot; they will make your job easy and fast!

Company Reviews

Before buying a laser its good to perform a due diligence on the company itself.  You dont want the company to go out of business 2 months into your 1 or 2 year warranty.  A good place to start is third party review sites that are Google approved like Yelp, TrustPilot, Indeed, or the Better Business Bureau.

For example check out reviews of Boss Laser, LLC.  If you want to go even deeper call the company and talk with tech support or talk to other machine owners.  At the same time realize that competitors can pose on forums as machine owners and can provide false or misleading information.  So, its best to get a general consensus of reviews before coming to a firm conclusion.   It may also be a good idea to visit the company personally to see how the staff treats you how the machines operate, and to just get an idea of how professional and organized their work and factory environment is.




Laser cutting machines can add a lot of value and bottom line profit to any machine shop.  It can detail artwork fast and easy and make you look like a master design artist. It can cut or mark to create awe inspiring designs in wood and metal rather easily. Whatever your pc can display can be done almost as accurately. Laser cutting is of course also being used for industrial manufacturing applications, but today it is also emerging in many sophisticated small businesses, schools, and hobbyist maker shops. It is being become more popular to be use for cutting, boring, and engraving today. Laser cutting works by directing the output of a high-power laser and it usually though optics. It was used to drill holes in diamond dies the first production of laser cutting machine, and was made by the Western Electric Engineering Research Center.click here for more details.

There is advantage in laser cutting over the mechanical cutting it is include easier work holding and reduced contamination of work piece, because there will be no cutting edge that will contaminate the materials. Accuracy is better, because the laser beam is not wear during the process, and also it will minimize the chance of deforming the material that is being cut. Traditionally, there are some materials that were difficult or impossible to cut. There is also advantage in laser cutting over plasma cutting one of this is for being more accurate and uses less energy when cutting sheet metal. On the other hand, most of the industrial lasers cannot cut through the greater metal thickness, and the plasma can cut the greater metal thickness. for further details, visit : http://resources.parsons.edu/labs/laser-lab/


In laser cutting, there are three main types of lasers used. The CO2 laser, Nd-YAG, and the RF method.The CO2 laser is use for cutting, boring and engraving, it is quiet similar in style with the Nd-YAG lasers and vary only in application. When using high power for boring and engraving, the NG-YAG laser is the one to be used, and also the CO2 laser, and Nd-YAG is being used for welding. Nowadays, DC designs require electrodes inside the cavity, and they can encounter electrode erosion and plating of electrode materials on the glassware and optics, and for that the RF resonators has the external electrodes so it is not inclined to those problems. CO2 laser are being used for some industrial cutting of lots of materials, such as stainless steel, aluminum, paper, wax, plastics, wood, fabrics, and steel, while the Nd-YAG lasers are mostly used for cutting and marking metals as well as ceramic materials.

Laser cutting works accurately and there are some ways or methods in cutting in different types of material when you are using the lasers. And the methods are vaporization cutting, it is focus beam heats and the surface of the materials to boiling point and generates a keyhole, and the keyhole will quickly increase in absorption thereby deepening the hole. Melt and Blow is also one of the methods, melt and blow uses in high-pressure gas to blow molten material from the cutting area, and impressively decreasing the need power.  Another method is thermal stress; the brittle materials are particularly sensitive to thermal fracture, a feature exploited in thermals stress cracking.

You will want to look at different companies prior to buying any laser.  You can find third party feedback from non-profit companies such as BBB who’s goal is to advance market place trust.  Check out BossLaser reviews there for example.…