CO2 vs Fiber Technology: Which one is right for you?

A careful and comprehensive analysis must examine not only the cutting equipment itself but also the impact the new machine will have on other existing fabrication processes.

Advancement of Fiber Laser Technology

Fiber laser cutting machine has been a standout amongst the most “problematic” innovations acquainted with the metalworking market for CO2 lasers were first presented for cutting in the 1980s. Fiber laser technology is considered a problematic and “progressive” change since it has affected the whole the norm in sheet metal creation. What’s more, the open doors are anything but difficult to figure it out.

Over a generally brief timeframe, we have seen exponential advances in Fiber laser technology utilized for flat sheet metal cutting. In only five years, Fiber lasers accomplished the 4kW cutting limit that took CO2 lasers roughly four times as long to reach.

Favorable circumstances of Fiber Laser Technology

The essential favorableconditions of fiber laser cutting machine level sheet metal with Fiber laser technology are gotten from its stable, Fiber-to-Fiber, a compact solid-state design configuration that is sans support and gives a lower cost of a taskthat can be accomplished with equivalent CO2 lasers. Fiber laser pillar qualities additionally accommodate considerably quicker cutting rates than CO2 as we will investigate underneath.

The engaged light emission a 2kW Fiber laser shows a 5X more prominent power thickness at the point of convergence when contrasted and a 4kW CO2 laser. It additionally has a 2.5X more prominent ingestion trademark because of the shorter wavelength of the Fiber laser.

The fiber laser cutting machine can cut copper, metal and aluminium are much preferable and all the more securely over CO2 because the bar is all,the more promptly ingested and not reflected. Fiber laser working expenses are regularly 50% of what a CO2 framework can offer because of the lower electrical utilization and high electrical effectiveness of Fiber Lasers.

There are numerous parts of working a CO2 laser that doesn’t exist with working a Fiber laser:

  • A high-power Fiber laser is fit for cutting up to 5 times quicker than a regular CO2 laser and uses a large portion of the working expenses.
  • Fiber lasers won’t bother with any warm-up time – ordinarily around 10 minutes for each start-up for a CO2 laser.
  • The Fiber laser has no pillar way support, for example, a mirror or focal point cleaning roars checks and bar arrangements. This can expend another 4 or 5 hours out of each week for a CO2 laser.
  • Fiber lasers have a completely fixed Fiber optic shaft way both at the power source and at the Fiber conveyance to the cutting head. The shaft isn’t subjected to pillar way defiles just like the case with CO2 lasers.
  • Fiber optic shaft always keep up reliable spouts bar focusing.

In the event that you are running numerous lasers, maybe you could consider supplanting two CO2 laser cutting machines with one fiber laser cutting machine? Check here.

Absolutely knowing and getting ready ahead of time that front-end office systems should stay aware of the profitability of the Fiber laser enables fabricators to modify their front-end procedures to keep the Fiber laser cutting, instead of sitting tight for occupations. For fabricators utilizing co2 laser cutter, cutting systems, making the move to Fiber technology speaks to a gigantic window of chance that can’t be neglected.…

DIFFERENT TYPES OF LASER CUTTING EQUIPMENT

DIFFERENT TYPES OF LASER CUTTING EQUIPMENT

There are different types of laser cutting equipment, and it is useful for every person having problems cutting and engraving, and it has some common types of laser cutting equipment, and the laser machines that are already offered in the market mostly change by the use of laser source, because it is fast and easy to use. The common types of laser cutting equipment are CO2 lasers, fiber lasers, and the Nd: YAG, Nd: YVO. Each type of laser cutting equipment has its own advantages and disadvantages. The CO2 laser is created on a carbon dioxide gas mixture, which is stirred electrically, and their usually used or fitted for working on non-metallic materials and on most plastics. And also the CO2 lasers have a quietly a high efficiency and feature a precise good beam quality, that is why CO2 lasers is mostly used laser types. click here for related information.

The other common type of laser cutting equipment is fiber lasers. It is commonly used for metal marking by way of strengthening, for high-contrast plastic markings, and metal engraving. Fiber laser technology is one of the solid state laser group, there no need for maintenance and feature a long service life of at least 25,000 laser hours. The fiber lasers will generate a laser beam by means of the so-called seed laser and amplify it, particularly in designing a glass fiber, and it will supply with energy. A crystal laser is also one of the common types of laser cutting equipment, and it is also one of the solid state lasers. Most of the lasers today for marking applications are pumped by diodes. Crystal lasers have the same wavelength just like the fiber lasers and it is also fitted to use for marking metals and plastics. for more information, visit : https://www.wired.com/2013/11/printed-liquid-crystal-lasers/

DIFFERENT TYPES OF LASER CUTTING EQUIPMENT

The laser cutting equipment is different from the traditional mechanical cutters. The lasers don’t have to make physical contact with the metals, and also it will minimize the chances of the material to be contaminated, there’s no need to wear on the equipment. The lasers cutting machine can cut metal with higher accuracy that the traditional mechanical cutter will not. The mechanical cutters are usually a wide heat affected zone that will cause material warping from time to time, while the laser cutting machines will minimize the chance that the materials get warped. One of the things you need to consider is your safety in using the laser cutting machines and the mechanical cutting machines, most of the lasers cutting machine are fully enclose to prevent accidents or to avoid mass destruction! Laser cutting machines are equipped with computer touch screens, so they are fast and efficient. The workers will only plot out the design alternations for prototypes and large part job runs. Most of the laser cutter machines progress quickly because of the high feed rates and laser head speed. Your workers can do multiple jobs, because they are only monitoring the process. Laser cutting machines can help you a lot; they will make your job easy and fast!

Company Reviews

Before buying a laser its good to perform a due diligence on the company itself.  You dont want the company to go out of business 2 months into your 1 or 2 year warranty.  A good place to start is third party review sites that are Google approved like Yelp, TrustPilot, Indeed, or the Better Business Bureau.

For example check out reviews of Boss Laser, LLC.  If you want to go even deeper call the company and talk with tech support or talk to other machine owners.  At the same time realize that competitors can pose on forums as machine owners and can provide false or misleading information.  So, its best to get a general consensus of reviews before coming to a firm conclusion.   It may also be a good idea to visit the company personally to see how the staff treats you how the machines operate, and to just get an idea of how professional and organized their work and factory environment is.

 …